ZEBRA KR403 PRINTER DRIVER INSTALLATION

Step 1
Search Zebra Setup Utilities in Programs.


Step 2
Click « Yes »


Step 3
Click « Next »


After clicking « Next », the Driver Package Preinstall will begin, as below


Step 4
Select « USB (Universal Serial Bus) » then « Next ».


Step 5
Plug in the printer USB cable into the PC (NUC).
Open the device notification in the Windows tray to check the status. It takes about 15 seconds for Windows to process the new device. When Windows has finished recognizing the printer, click on « Finish ».


Step 6
Click on « Install New Printer » and follow the first instructions.






Step 7
The name of the printer is « ZDesigner KR403 ».
Select it in the list and click on « Next ».


The printer is now installed, as below.


Step 8
Go to Control Panel > Devices and Printers > Select the KR403 printer > Click right > Printing preferences


Click on « Import… » > Select in C: drive ASNA SetupKey, « KR403DEFAULT.drs » >
Click « Apply » > Click « OK »




Step 9
Go to Printer preferences > Click on “Print Test Page”




IF THIS PROCESS FAILS TO INSTALL THE DRIVERS, Proceed with the following instructions:
1. Right click "Computer" and click on "manage"
2. Open the device manager section
3. right click the zebra printer from the "other devices" section and uninstall
4. right click any of the other fields in device manager and click "scan for hardware changes"